Angle and height as you wish! Bauhutte "GAS LIFTING TILT DESK", a work desk for painters!

You may have installed furniture for each environment, whether for work, hobbies, or gaming, but a desk is probably the must-have furniture among them. A monitor or TV is placed, a keyboard and mouse are set up, and a desk is the place where you reach for your phone, food, or drink. A variety of items are placed on the desk, such as a cell phone, food and drinks within easy reach, and so on. Recently, there are more and more desks that can be adjusted to the desired height according to the work and physique, but the desk top must be level, right? However, the assumption is that the desk top should be level, because otherwise devices on it will not be stable, and if a monitor or TV falls over, it will be a catastrophe. A typical example of this would be when drawing pictures. Many people find it easier to draw at an angle, whether analog or digital, and some people change the height of their desks by sitting or standing so that they do not remain in the same posture. However, a separate workbench would make the desk too cramped, and it is difficult to have multiple desks for different heights. If that's the case, then a desk that can change angles and heights in a single desk is the answer! Bauhutte, a gaming furniture manufacturer, has introduced the " GAS LIFTING TILT DESK "!

A desk for "painters" that can be adjusted in angle and height

Bauhutte's "GAS LIFTING TILT DESK" is a work desk that can adjust the angle and height of the top board, and is like a tilt table and a lift desk all in one. It is a high-performance desk that can be adjusted to the best position for your height and work style with simple operation, and can also be used to change from a sitting position to a standing position with a single unit.

First, let's take a look at the size of the top panel, which is the most important aspect of a desk. It is 120 cm wide x 55 cm deep, so there is plenty of room for a large LCD tablet, and it is also spacious enough to hold documents. For analog work, there is enough space for spreading out manuscripts and materials as well as art supplies, allowing you to work in a relaxed and spacious manner.

For digital work, there is still plenty of room for a mouse, keyboard, and left-hand devices in addition to the LCD tablet. Images of 15.6" and 24" LCD tablets placed on the table are available for reference. Monitors and other devices placed on the "GAS LIFTING TILT DESK" will be unstable when angled, so use an extension desk or similar.

Adjusting the angle and height of the top panel, the greatest feature of the "GAS LIFTING TILT DESK," is super easy with a single lever. The lever on the side of the desk allows you to intuitively set the angle, and the lever on the top panel allows you to intuitively set the height. The height adjustment is gas-pressure type, so it can be easily raised and lowered by one person just by pulling the lever.

Bauhutte"GAS LIFTING TILT DESK"製品ページ

When the top panel is sloped, there is a concern that items placed on top may slip off. A thin stopper is mounted on the front of the top panel to prevent slipping off. Although the stopper will catch devices to prevent them from slipping off, you should take all possible precautions by using a commercially available non-slip sheet in combination. Liquid tabs are expensive.

Bauhutte"GAS LIFTING TILT DESK"製品ページ

The bottom of the legs are equipped with adjusters to allow the desk to be installed horizontally. If the installation is unstable, angling the tabletop will make it more insecure, and the device may fall or topple over, and above all, rattling will affect your drawing. Parallel and stable installation is the first step toward comfortable work.

Bauhutte"GAS LIFTING TILT DESK"製品ページ

The simple shape of the legs makes it possible to set up a desktop PC or place a small piece of luggage, and it is also easy to install an extension desk or footrest. Build your best working environment around the "GAS LIFTING TILT DESK"!

Legs and tops can be purchased separately.

Bauhutte "GAS LIFTING TILT DESK" is now on sale. The leg and top set is priced at 61,127 yen (tax included ) and can be purchased from the Bauhutte store on Amazon.co.jp and other retailers. Please note that the two pieces are packaged together: one for the top panel and one for the legs. The set is basically for use as a set, but it is also possible to purchase only the tabletop and legs for 14,869 yen (including tax) and46,258 yen (including tax) for the legs only. Even if you know it is a good product, its large size and low price may make you feel a little uneasy. For those people, the "GAS LIFTING TILT DESK" has been used in a professional setting and verified! The article includes interviews withStudio Colorido and Asahi Production s, two animation production companies, who actually used the GAS LIFTING TILT DESK from a professional's point of view, so please take a look at it when purchasing! For more details and interviews, please visit the Bauhutte "GAS LIFTING TILT DESK" product page!

Bauhutte"GAS LIFTING TILT DESK"製品ページ